The experimental study of nanofluids boiling crisis on cylindrical heaters

The paper deals with the experimental study of nanofluids boiling on cylindrical heater. The studied nanofluids were prepared on the basis of distilled water and nanoparticles of silicon, aluminum and iron oxides as well as diamond. The volume concentration of nanoparticles varied from 0.05 to 1%. The nanoparticles diameter ranged from 10 to 100 nm, the diameter of the heater was varied from 0.1 to 0.3 mm. It is revealed that the use of nanofluids provides a several-fold increase of the critical heat flux. However, critical heat flux in nanofluids depends on the material and size of nanoparticles as well as on the diameter of used cylindrical heater. It is shown that the critical heat flux increases with increasing the nanoparticles size, while it decreases with increasing the heater diameter. It was revealed for the first time that the critical heat flux depends on the boiling process duration.