کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5019041 | 1467838 | 2017 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A comparative study of conventional and high speed grinding characteristics of a thin film multilayer structure
ترجمه فارسی عنوان
یک مطالعه تطبیقی ویژگی های سنگ شکن متداول و با سرعت بالا یک ساختار چند لایه چند لایه
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
High speed and conventional speed grinding characteristics of a thin film multilayer solar panel were investigated. The grinding force and surface roughness were measured and the interface integrity of the ground workpieces was examined. The results indicated that when applying a high wheel speed of up to 120Â m/s, the ground surfaces predominantly exhibited ductile flow and the interface integrity was significantly improved. The maximum undeformed chip thickness was found to be an important parameter to measure grinding performance and interfacial failure. Delamination was observed at interfaces when the maximum undeformed chip thickness exceeded a threshold value and the finite element method (FEM) analysis revealed that the interfacial failure was mainly induced by shear stress.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Precision Engineering - Volume 50, October 2017, Pages 222-234
Journal: Precision Engineering - Volume 50, October 2017, Pages 222-234
نویسندگان
Chengwei Kang, Han Huang,