کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5145055 | 1497335 | 2017 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of membrane electrode assemblies by direct spray catalyst on water swollen Nafion membrane for PEM water electrolysis
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Fabrication of membrane electrode assemblies by direct spray catalyst on water swollen Nafion membrane for PEM water electrolysis Fabrication of membrane electrode assemblies by direct spray catalyst on water swollen Nafion membrane for PEM water electrolysis](/preview/png/5145055.png)
چکیده انگلیسی
Membrane electrode assemblies (MEA) prepared by direct spraying catalyst ink on water swollen membrane was presented for PEM water electrolysis. In the new fabrication process, hot water was inlet both as a swelling agent and heat source to improve the dimensional stability of Nafion 117 in spraying process. With such method, the membrane can also avoid shrinkage in catalyst ink drying process. The obtained MEA exhibited a larger voltammetric charge Q in anode and improved performance comparing with the conventional MEA, this may due to the surface area of membranes were expanded in catalyst spraying procedure. The influence of swelling temperature on the conductivity of Nafion 117 and the performance of water electrolyser was also investigated. The results indicate that the swelling-spraying method has the potential to fabricate the high quality MEA for PEM water electrolysis.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Hydrogen Energy - Volume 42, Issue 42, 19 October 2017, Pages 26183-26191
Journal: International Journal of Hydrogen Energy - Volume 42, Issue 42, 19 October 2017, Pages 26183-26191
نویسندگان
Yan Shi, Zhuoxin Lu, Lili Guo, Changfeng Yan,