کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5189203 | 1381179 | 2006 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Ultra-strong gel-spun UHMWPE fibers reinforced using multiwalled carbon nanotubes
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Ultra-strong gel-spun UHMWPE fibers reinforced using multiwalled carbon nanotubes Ultra-strong gel-spun UHMWPE fibers reinforced using multiwalled carbon nanotubes](/preview/png/5189203.png)
چکیده انگلیسی
This paper reports the use of multiwalled carbon nanotubes (MWCNT) to reinforce and toughen gel-spun ultra high molecular weight polyethylene (UHMWPE) fibers. By adding 5Â wt% MWCNT, ultra strong fibers with tensile strengths of 4.2Â GPa and strain at break of â¼5% can be produced. In comparison with the pure UHMWPE fiber at the same draw ratios, these values represent increases of 18.8% in tensile strength and 15.4% in ductility. In addition, a 44.2% increase in energy to fracture has also been observed. The mechanism of reinforcement has been studied using a combination of high resolution scanning electron microscopy (SEM) and micro-Raman spectroscopy. Carbon nanotube alignment along the tensile draw direction has been observed at high elongation ratios. Such alignment induces strong interfacial load transfer both at small and large strains to enhance the stiffness and tensile strength of the composite fiber. Consequently, the mechanical properties of the composite fiber follow closely with the rule of mixtures. Our work also reveals potential for positive deviation from rule of mixtures if the CNT alignment can be further optimized.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer - Volume 47, Issue 5, 22 February 2006, Pages 1604-1611
Journal: Polymer - Volume 47, Issue 5, 22 February 2006, Pages 1604-1611
نویسندگان
Shilun Ruan, Ping Gao, T.X. Yu,