New heat stable and processable poly(amide-ether-imide)s derived from 5-(4-trimellitimidophenoxy)-1-trimellitimido naphthalene and various diamines

New aromatic diimide-dicarboxylic acid having flexible ether linkage, 5-(4-trimellitimidophenoxy)-1-trimellitimido naphthalene, was synthesized by the reaction of trimellitic anhydride with 5-(4-aminophenoxy)-1-naphthylamine. Then, a series of novel aromatic poly(amide-ether-imide)s were prepared by the phosphorylation polycondensation of the synthesized monomer with various aromatic diamines. A model compound was synthesized by the reaction of the monomer with aniline. The resulting polymers with inherent viscosities of 0.43-0.70 dl/g were obtained in high yield. All new compounds including the naphthalene-based monomer, model compound, and the resulted polymers were characterized by FT-IR and NMR spectroscopic methods. The ultraviolet λmax values of the poly(amide-ether-imide)s were also determined. The resulted polymers exhibited a good solubility in a variety of high polar solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), and pyridine. For some of the polymers obtained the crystallinity behavior was estimated by means of wide-angle X-ray diffraction (WXRD) method, and the resulted polymers exhibited nearly an amorphous nature. Thermal stability of the obtained polymers was determined by thermogravimetric analysis (TGA/DTG), and the 10% weight loss temperatures of the one-step degraded poly(amide-ether-imide)s were found to be in the range between 528 and 551 °C in nitrogen. From differential scanning calorimetric (DSC) analyses, the polymers showed Tgs between 276 and 307 °C. Cyclic voltammetry (CV) measurements of a typical polymer showed that they are also electrochemically stable.