Physico-chemical aspects of polyethylene processing in an open mixer. Part 20: Additional product yields on bimolecular hydroperoxide decomposition with an alcohol group

Most products formed on polyethylene oxidation result from hydroperoxide decomposition. The product yields can be calculated for various mechanisms of hydroperoxide decomposition. This work concerns the reaction of a hydroperoxide with an alcohol group thought to be dominant in the advanced stages of polyethylene processing in the high temperature range (170-200 °C). Besides hydrogen abstraction by caged alkoxy radicals already envisaged previously, the possibility of β-scission is taken into account. This additional reaction introduces significant complexity into the reaction schemes. This is especially so because additional caged radical pairs must be included into the schemes and the calculations. It becomes possible to calculate the yields of aldehyde and vinyl groups that do not result from hydroperoxide decomposition in the absence of β-scission. The yields of the main oxidation products such as alcohols and ketones are not much affected by taking into account β-scission. The yield of aldehydes is important in the whole temperature range and increases considerably if the temperature is raised from 170 to 200 °C. It becomes more important than the ketone yield. The vinyl groups are formed in amounts corresponding roughly to 10-15% of the trans-vinylene groups in the temperature range of 170-200 °C.