کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5205268 | 1502927 | 2017 | 11 صفحه PDF | دانلود رایگان |
The present study investigates the deformation behavior of Poly-Ether-Ether-Ketone (PEEK) at elevated temperatures and low strain rates through a combination of experiments and simulations. Uniaxial tension tests at elevated temperatures (293-543Â K) and strain rates (8.3Â ÃÂ 10â3 to 3.3Â ÃÂ 10â1 sâ1) were performed, and the temperature- and rate-dependencies of the deformation behavior and mechanism of PEEK were discussed in detail. The Erichsen test was performed at temperatures varying from 473 to 533Â K and a fixed speed of 1Â mm/s. Based on an investigation of numerous constitutive models, a phenomenological model called DSGZ was employed in ABAQUS/Explicit to characterize the deformation behavior of PEEK at elevated temperatures, and the deviation between experimental and simulation data was less than 10% at large deformations. Moreover, the simulation results accurately predicted the necking and cold drawing phenomena in the tension test as well as the deformation in the Erichsen test.
Journal: Polymer Testing - Volume 63, October 2017, Pages 349-359