Material PropertiesComparative study on degradation of ethylene-propylene rubber for nuclear cables from gamma and beta irradiation

Considering safety is the priority concern of nuclear power plants, equipment qualification testing of the nuclear components manufactured should be paid special attention to. Thereinto, equivalent conversion (1:1) from the absorbed beta doses to gamma doses is a rule of thumb for irradiation qualification testing of the polymers used as nuclear cables, however whether it is reasonable and applicable to Chinese domestic polymers still requires investigation. In this paper, both gamma and beta irradiation testing with the actual dose rates and total absorbed doses in China Advanced Passive (CAP) series nuclear power plant was performed upon one domestically manufactured ethylene-propylene rubber intended for nuclear cable insulation in China. The mechanical and the electrical properties before and after irradiation were measured to compare the extent and the trend of degradation between the two irradiation types, and related oxidation degradation mechanism especially its attenuation along the thickness was quantitatively addressed.