Analysis methodChemiluminescence spectral analysis of styrene-butadiene and acrylonitrile-butadiene rubbers using a multichannel Fourier-transform chemiluminescence spectrometer

The chemiluminescence spectra of styrene-butadiene and acrylonitrile-butadiene rubbers isothermally heated in the range between room temperature and 200 °C were measured with a multichannel Fourier-transform chemiluminescence spectrometer. The observed spectra were analyzed by a least-squares fit using a Gaussian function to determine the peak intensity and the peak wavelength of emission bands. It was found that the peak wavelength of acrylonitrile-butadiene rubbers was slightly longer than that of styrene-butadiene rubbers due to the influence of the nitrile groups. The peak intensity of chemiluminescence from styrene-butadiene rubbers decreased with the styrene content, while that from hydrogenated acrylonitrile-butadiene rubbers increased with the iodine value. From these experimental results, it is concluded that the content of double bonds in the butadiene units in rubbers is measurable by chemiluminescence spectral analysis.