کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5206839 | 1382323 | 2012 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Cylinder test: Development of a new microbond method
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The microbond test has been investigated with respect to test accuracy and repeatability. It has been concluded that the interfacial shear strength deduced from this method is uncertain due to the droplet shape, which can, however, be reduced by modifying the geometry. In the new method it was proposed that the droplet is replaced by a cylinder. Comparative tests proved that the accuracy improved due to the modifications. The effects of test speed and geometrical parameters (height/diameter of the cylinder) on the interfacial shear strength were investigated. It was found that the test results are sensitive to these parameters and the related changes are discussed. It is recommended to perform the cylinder test in the pull-out range of 10-100Â mm/min where the interfacial shear strength does not change with testing speed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer Testing - Volume 31, Issue 1, February 2012, Pages 164-170
Journal: Polymer Testing - Volume 31, Issue 1, February 2012, Pages 164-170
نویسندگان
Balint Morlin, Tibor Czigany,