Synthesis, characterization and application of a chelating resin for solid phase extraction of some trace metal ions from water, sediment and tea samples

A new chelating resin, poly (2-thiozylmethacrylamide-co-divinylbenzene -co-2-acrylamido-2-methyl-1-propanesulfonic acid) was successfully prepared in the present work. Its composition, morphology, and properties were studied by Fourier transform infrared spectroscopy, scanning electron microscopy, elemental analysis, and thermogravimetric analysis. Several factors affecting the extraction of the metal ions including pH, the eluent type and concentration, flow rate, sample volume, and effect of interfering ions were investigated. The adsorption capacity of the resin for the elements studied was found in the range of 4.76-13.0 mg g−1. A preconcentration factor of 150 was achieved at the optimum conditions. The limits of detection (3s/b) varied from 0.23 to 1.07 μg L−1. The method validation was performed by analyzing certified reference materials (TMDA-70 Fortified lake water, SPS-WW1 Batch 111-Wastewater, RM 8704 Buffalo river sediment, GBW07605 Tea) and spiked water samples. The method was applied to separate and determine the trace levels of Cd(II), Ni(II), Co(II), Mn(II) and Pb(II) in the well water, river water, street sediment, and tea samples.