Oxygen deficiency in oxide films grown by PLD

The incorporation of oxygen atoms in oxide films grown by pulsed laser deposition depends upon the oxygen pressure and laser power density. By carefully controlling these two parameters it is possible to control the oxygen deficiency in the samples, and thus to change their physical properties from insulating and transparent to absorbing and conducting. By using X-ray diffraction, Rutherford backscattering spectroscopy and resistivity measurements, we show that depending upon the oxide materials oxygen deficiency in the films can induce either the growth of stable sub-oxide phases or the formation of nanocomposite films by phase separation. The first case corresponds to oxides with a mixed valency cation like Ti, which leads to the formation of stable, crystalline and highly conductive TiOx sub-oxide phases. The second case is well described by the indium tin oxides (ITO) in which a large oxygen deficiency leads to metallic clusters embedded into a stoichiometric matrix, i.e. nanocomposite films. This phenomenon is due to the fact that sub-oxides of these compounds are not stable and thus the oxygen deficiency induced a phase separation.

Research highlights▶ The incorporation of oxygen atoms in oxide films grown by pulsed laser deposition depends upon the oxygen pressure and laser power density.