کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
542381 | 871548 | 2006 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication and performance of a micromachined 3-D solenoid inductor
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی کامپیوتر
سخت افزارها و معماری
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A high-Q and fres (self-resonant frequency)solenoid inductor was fabricated by using the microelectromechanical systems(MEMS) technology with air-core structure. This inductor has an air core and an electroplated copper coil to reduce the series resistance, and the solenoid structure with laterally laid out structure saves the chip area significantly. The measurement results show that this inductor has high Q-factor and stable inductance over wide range of operating frequency. The maximum Q-factor of this inductor is 38 and the inductance is 1.78 nH at 5 GHz with an air core of 45 μm. Moreover, the Q-factor and the inductance grow with the increasing of the air core.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Microelectronics Journal - Volume 37, Issue 9, September 2006, Pages 948–951
Journal: Microelectronics Journal - Volume 37, Issue 9, September 2006, Pages 948–951
نویسندگان
Dong-Ming Fang, Xi-Ning Wang, Yong Zhou, Xiao-Lin Zhao,