کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5438122 | 1398181 | 2017 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A modified gelcasting approach to fabricate microscale randomized 1-3 piezoelectric arrays
ترجمه فارسی عنوان
یک رویکرد اصلاح ژله ای برای ساختن آرایه ی پیزوالکتریک به صورت تصادفی یکی از مقیاس های میکروسکوپی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
A modified gelcasting approach was used to fabricate the microscale randomized 1-3 piezoelectric array, which involves the in situ polymerization of hydantion epoxy resin and 3,3â²-Diaminodipropylamine (DPTA) in the lead zirconate titanate (PZT) suspensions with low viscosity and high solid loading. Rheological results demonstrated that the hydantion epoxy resin concentration had little effect on the viscosity of the premix solution, and therefore the optimized solid loading of the suspensions with 15.0Â wt% resin could reach as high as 55.0Â vol%. Weibull analysis also revealed that a more homogenous microstructure was obtained derived from the 55.0Â vol% PZT suspension, where the Weibull modulus and the characteristic flexural strength reached the maximum value of 12.57 and 80.94Â MPa. The excellent randomized piezoelectric pillar array with superior structural integrity and high fidelity was successfully fabricated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 43, Issue 1, Part A, January 2017, Pages 144-148
Journal: Ceramics International - Volume 43, Issue 1, Part A, January 2017, Pages 144-148
نویسندگان
Rui Xie, Xiaofeng Wang, Guowen Peng, Tian Xie, Dou Zhang, Kechao Zhou, Guoji Huang, Guoping Wang, Hongqing Wang,