The microstructural and mechanical properties of geopolymer composites containing glass microfibres

This paper presents the effects of microfibre contents on mechanical properties of fly ash-based geopolymer matrices containing glass microfibres at 0, 1, 2 and 3 mass%. The influence of glass microfibres on the fracture toughness, compressive strength, Young's modulus and hardness of geopolymer composites are reported, as are the microstructural properties investigated using scanning electron microscopy. Results show that the addition of 2 mass% glass microfibres was optimal, exhibiting the highest levels of fracture toughness, compressive strength, Young's modulus and hardness. The results of the microstructural analysis indicate that the glass microfibres act as a filler for voids within the matrix, making a dense geopolymer and improving the microstructure of the binder. This leads to favourable adhesion of the composites, and produces a geopolymer composite with good mechanical properties, comparable to pure geopolymer. The failure mechanisms in glass microfibre-reinforced geopolymer composites are discussed in terms of microstructure.