کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5454111 1514159 2017 18 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Time of flight measurements of unirradiated and irradiated nuclear graphite under cyclic compressive load
ترجمه فارسی عنوان
اندازه گیری زمان پرواز از گرافیت هسته ای بدون تابش و تجدید شده تحت بار فشاری سیلیکونی
ترجمه چکیده
تکنیک زمان پرواز برای بررسی سختی گرافیت هسته ای با توجه به درجه و جهت دانه استفاده شده است. یک وسیله بارگیری برای جمع آوری زمان پرواز از زمان بارگیری فشرده سازی دوامدار تا 80 درصد از مقاومت فشاری ماده و تخلیه نمونه ها در امتداد محور تنش اعمال شد. سرعت انتقال (مربوط به مدول یانگ) با افزایش استرس اعمال شده کاهش می یابد؛ و بسته به درجه گرافیت و جهت گیری، مدول پس از تخلیه، افزایش، کاهش یا ثابت باقی می ماند. این آزمایش ها هنگام مشاهده ریزساختار در طی دوره های بار / تخلیه تکرار شد. کاهش اولیه در سرعت انتقال با بار فشاری به ایجاد میکروکراک در فازهای پرکننده و اتصال دهنده منجر می شود. سه نوع رفتار متمایز در تخلیه وجود دارد، بسته به درجه، درجه تابش و جهت بارگذاری. این رفتارهای مختلف را می توان از لحاظ ساختار میکروسکوپی مشاهده کرد که از میکروسکوپ انجام شده در طی بارگیری است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی هسته ای و مهندسی
چکیده انگلیسی
The time-of-flight technique has been used to investigate the stiffness of nuclear graphite with respect to the grade and grain direction. A loading rig was developed to collect time-of-flight measurements during cycled compressive loading up to 80% of the material's compressive strength and subsequent unloading of specimens along the axis of the applied stress. The transmission velocity (related to Young's modulus), decreased with increasing applied stress; and depending on the graphite grade and orientation, the modulus then increased, decreased or remained constant upon unloading. These tests were repeated while observing the microstructure during the load/unload cycles. Initial decreases in transmission velocity with compressive load are attributed to microcrack formation within filler and binder phases. Three distinct types of behaviour occur on unloading, depending on the grade, irradiation, and loading direction. These different behaviours can be explained in terms of the material microstructure observed from the microscopy performed during loading.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Nuclear Materials - Volume 487, 15 April 2017, Pages 50-67
نویسندگان
, , ,