کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5459076 | 1516180 | 2017 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The microstructure and properties of Cr alloying layer after surface alloying treatment induced by high current pulsed electron beam
ترجمه فارسی عنوان
ریزساختار و خواص لایه آلیاژ کروم پس از درمان آلیاژ سطح ناشی از پرتو الکترون با پالس بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آلیاژ سطح پرتو الکترونی پالسی جریان بالا، مقاومت در برابر خوردگی، راه حل جامد،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
چکیده انگلیسی
The Cr alloying layer was introduced on the steel substrate subjected to surface alloying treatment by combination of magnetron sputtering and high current pulsed electron beam. The microstructure of the Cr alloying layer was studied using SEM, XRD and TEM. The thickness of the remelted layer was about 5 μm after surface alloying treatment. The 2 μm thick Cr-rich layer containing Fe-Cr solid solution and a small amount of amorphous phase was observed at the top of remelted layer after irradiation. The remelted layer also contained columnar austenite grains and plate martensite. The microhardness of Cr alloying layer only dropped slightly comparing with the original steel substrate. However, the corrosion resistance of the specimen after surface alloying treatment was significantly improved and the Fe-Cr solid solution was believed to contribute to the formation of passive film to increase the corrosion resistance.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 714, 15 August 2017, Pages 96-103
Journal: Journal of Alloys and Compounds - Volume 714, 15 August 2017, Pages 96-103
نویسندگان
Guangze Tang, Dian Luo, Shawei Tang, Qiang Mu, Liqin Wang, Xinxin Ma,