کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5459493 1516186 2017 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
High strain rate compression behavior of a heavily stabilized beta titanium alloy: Kink deformation and adiabatic shearing
ترجمه فارسی عنوان
رفتار فشرده سازی سرعت بالا در یک آلیاژ تیتانیوم بتا تثبیت شده بسیار تثبیت شده: تغییر شکل کینک و برش آدیاباتیک
کلمات کلیدی
نرخ فشار بالا، تغییر شکل کینک، برش آدیاباتیک، انتقالی دینامیک چرخشی،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فلزات و آلیاژها
چکیده انگلیسی
High strain rate compression deformations at 5 × 103s−1 of Ti-35V-15Cr-0.3Si-0.1C beta titanium alloy were conducted at variant temperatures from 20 °C to 800 °C on split-Hopkinson pressure bar system. It is found that the dynamic stress-strain curves at such a high strain rate contain hardening stages and softening stages. Different stages suggest different deformation mechanisms. In the hardening stages, kink deformation is uncommonly observed. The formation of kink bands is found to be responsible for the hardening effect. Adiabatic shearing began with the stress drops in the softening stages. From then on, the deformations localized in narrow regions, where adiabatic shearing bands (ASBs) formed at last. Dynamic recrystallization (DRX) occurred in the ASBs. The ultra-fine recrystallization grains with grain size of 0.28 μm, 0.35 μm, and 4.5 μm are observed in the ASBs formed at 400 °C, 600 °C and 800 °C respectively. It is really hard so far to measure the true shear strains and the true temperatures in the ASBs. In order to estimate the true shear strains in the ASBs, an original method basing on the definition of shear strain is proposed in this paper. Then a modified equation using the true shear strain rather than the empirical factor is employed to estimate the true temperatures in the ASBs. On such a base, the DRX in present ASBs is well explained in kinetics via the rotational dynamic recrystallization (RDR) mechanism.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 708, 25 June 2017, Pages 84-92
نویسندگان
, , , , ,