کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5460375 | 1516194 | 2017 | 38 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and properties of Ti-Fe-Zr-Y alloys prepared by laser rapid prototyping
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Microstructure and properties of Ti-Fe-Zr-Y alloys prepared by laser rapid prototyping Microstructure and properties of Ti-Fe-Zr-Y alloys prepared by laser rapid prototyping](/preview/png/5460375.png)
چکیده انگلیسی
From the perspective of biomechanics and forming technology, Ti-Fe-Zr-Y alloys were designed using a “cluster-plus-glue-atom” model, and then the alloys were prepared by laser rapid prototyping on pure titanium substrate. The influences of Zr additions on microstructure and properties of the alloys were investigated. The results show that with the increasing of the Zr addition, the microstructure of the alloys changes sequentially from TiFe dendrite plus (β-Ti+TiFe+Zr2Fe) eutectic to (β-Ti+TiFe+Zr2Fe) eutectic to β-Ti dendrite plus (β-Ti+TiFe+Zr2Fe) eutectic, which leads to gradual decrease in the hardness and Young's modulus. The corrosion resistance firstly increases and then decreases, with the best corrosion resistance obtained at 5.86 at. % Zr addition. Compared with the binary Ti70.6Fe29.4 eutectic and Ti-6Al-4V alloys, the studied alloys present higher hardness, lower Young's modulus, and better corrosion resistance in Hank's solution.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 700, 5 April 2017, Pages 159-168
Journal: Journal of Alloys and Compounds - Volume 700, 5 April 2017, Pages 159-168
نویسندگان
Han Liying, Wang Cunshan, Qiang Jianbing,