کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5461162 | 1516184 | 2017 | 26 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Improvement of strength-toughness combination in austempered low carbon bainitic steel: The key role of refining prior austenite grain size
ترجمه فارسی عنوان
بهبود ترکیب ترکیبی از استحکام کششی در فولاد باینیتی کم کربن: نقش کلیدی تصفیه قبل از اندازه دانه آستنیت
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
چکیده انگلیسی
A low carbon bainitic steel with ultrahigh strength of â¼1650 MPa and elongation and toughness of â¼16% and â¼72 J/cm2 respectively, was obtained through austempering. The resulting microstructure and mechanical properties for varying prior austenite grain size (PAGS) are described. The refinement of the PAGS resulted in finer packet/block size, higher volume fraction and higher stability of retained austenite. The coalescence of bainitic laths was effectively hindered when the prior austenite grain size (PAGS) was refined to â¼10 μm. On the other hand, the coalescence of bainitic laths with crystallographically homogeneous characteristic was accompanied by disappearance of film-like retained austenite and crack can propagate without inhibition, which is detrimental to toughness. Eliminating the coalescence of bainite and increasing the volume fraction of retained austenite and its stability by means of refining PAGS contributed to ultrahigh strength - high ductility and toughness combination.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 710, 5 July 2017, Pages 702-710
Journal: Journal of Alloys and Compounds - Volume 710, 5 July 2017, Pages 702-710
نویسندگان
H.F. Lan, L.X. Du, Q. Li, C.L. Qiu, J.P. Li, R.D.K. Misra,