کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5463583 | 1517199 | 2017 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Control of intermetallic nano-particles through annealing in duplex low density steel
ترجمه فارسی عنوان
کنترل ذرات نانو ذرات بین الملل از طریق آنیلینگ در فولاد کم تراکم دوبلکس
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فولاد کم تراکم، حرارت درمانی، ویژگی های مکانیکی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
چکیده انگلیسی
In high Al-low-density steels for future vehicle light weighting, it is vital to design a thermal profile to form and retain the uniformly dispersed nanosize B2-type intermetallic precipitates that are crucial for the material strength. In this paper, the influence of heating rate, during annealing to 1050°C was simulated in a Au-image furnace. The post annealing structure was then characterized and two different morphologies of B2 particles were observed: triangle-like with a few micrometres (â1.4 μm) and disk-like precipitates with a diameter of around a few hundred nanometres. It was found that a slower heating rate (2.5°C/s) led to an increase in the volume fraction and to uniform distribution of particles within the microstructure and considerably affected the shape and size of the precipitates.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Letters - Volume 189, 15 February 2017, Pages 13-16
Journal: Materials Letters - Volume 189, 15 February 2017, Pages 13-16
نویسندگان
Alireza Rahnama, Stephen Spooner, Seetharaman Sridhar,