کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5464992 1517562 2017 27 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Variability of graphene devices fabricated using graphene inks: Atomic force microscope tips
ترجمه فارسی عنوان
تنوع دستگاه های گرافن ساخته شده با استفاده از جوهر گرافن: نکات میکروسکوپ نیروی اتمی
ترجمه چکیده
در طی دهه گذشته، مقدار قابل توجهی از دستگاه های نمونه اولیه گرافین گزارش شده است، اما متاسفانه هیچ یک از آنها با تولید انبوه و تجاری سازی مواجه نشده اند. یکی از دلایل اصلی این است که فناوری های گرافن به شدت تحت تأثیر مشکلات تنوع قرار دارند. گرچه گرافن خواص شیمیایی و فیزیکی تقریبا بی نظیری را ارائه می دهد، با توجه به وجود مقادیر غیر قابل کنترل از نقص ها، توسعه دستگاه های گرافن به شدت تحت تأثیر مشکل ساخت دستگاه های همگن و مشابه قرار گرفته است. یکی از جنبه های مهم در توسعه فن آوری گرافن عدم بررسی مطالعات تنوع است. در اینجا ما اولین تحلیل کامل متغیر برای یک دستگاه گرافن، یعنی نانو پروب های گرافن پوشش داده شده برای میکروسکوپ نیروی اتمی ارائه می کنیم. رعایت این کار با استفاده از یک روش ساختاری که قادر به مقیاس پذیری بزرگ است، افزایش می یابد: گرافن گرافن فشرده شده مایع. نتایج ما نشان می دهد که برای این دستگاه، حضور گرافن هیچ انحراف عملکردی را نشان نمی دهد که از دیدگاه متغیر، این دستگاه برای تولید انبوه آماده است. تجزیه و تحلیل متغیری مشابه باید برای سایر دستگاه ها به منظور شناسایی فن آوری های گرافن تحت تاثیر مشکلات تغییر پذیری قرار گیرد و آنها را قادر به معرفی نمونه های گرافن در بازار کند.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فناوری نانو (نانو تکنولوژی)
چکیده انگلیسی
During the last decade, an uncountable amount of graphene prototype devices have been reported, but unfortunately none of them has faced mass production and commercialization. One of the main reasons is that graphene technologies are highly affected by variability problems. Although graphene presents almost unbeatable chemical and physical properties, the development of graphene devices has been heavily hindered by the difficulty of fabricating homogeneous and identical devices, due to the presence of uncontrollable amounts of defects. One of the most preoccupying aspects in the development of graphene technology is the lack of reported variability studies. Here we present the first thorough variability analysis for a graphene device, namely graphene-coated nanoprobes for atomic force microscopes. The relevancy of this work is increased by the use of a fabrication method capable of large scalability: liquid-phase exfoliated graphene inks. Our results indicate that, for this device, the presence of graphene does not introduce any performance deviation indicating that, from the variability point of view, this device is ready for mass production. Similar variability analyses should be applied to other devices in order to detect which graphene technologies are not affected by variability problems, facilitating them the introduction of graphene prototypes in the market.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 320, 25 June 2017, Pages 391-395
نویسندگان
, , , , , , , , , ,