کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5465218 | 1398869 | 2016 | 23 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fe-Cr/CNTs nanocomposite feedstock powders produced by chemical vapor deposition for thermal spray coatings
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Fe-Cr/CNTs nanocomposite feedstock powders produced by chemical vapor deposition for thermal spray coatings Fe-Cr/CNTs nanocomposite feedstock powders produced by chemical vapor deposition for thermal spray coatings](/preview/png/5465218.png)
چکیده انگلیسی
The carbon nanotubes (CNTs) were synthesized using a traditional chemical vapor deposition technique directly on Fe-13Cr (wt%) feedstock powder for thermal spray coating without catalyst. CNTs were grown at a temperature of 500, 550, 600, 650, 700, 750 and 800 °C for 60 min and at 650 °C for 30, 45, 60 and 90 min under a controlled atmosphere with ethanol as a carbon source. The synthesized powders were characterized using various techniques: (1) Scanning Electron Microscope (SEM); (2) X-ray Diffraction (XRD); (3) Raman Spectroscopy; (4) Energy-dispersive Spectroscopy (EDS); and (5) Transmission Electron Microscope (TEM). The presence and quality of the CNTs were analyzed by Raman Spectroscopy in which D band and G band were clearly seen at 2187 cmâ 1 and 2653 cmâ 1 respectively. It was found that the CNTs had an average diameter of 32 to 81 nm and a length of 7 to more than 100 nm. The results show that CNTs can be grown on Fe-13Cr thermal sprayed feedstock powder with an optimal condition for the synthetization of CNTs at 600-650 °C for 60 min with homogeneous and uniform distribution of CNTs. The FeCr/CNTs composite powder was successfully sprayed using Low Velocity Oxy-Fuel (LVOF) that confirmed the potential for use as a new coating.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 306, Part A, 25 November 2016, Pages 323-327
Journal: Surface and Coatings Technology - Volume 306, Part A, 25 November 2016, Pages 323-327
نویسندگان
S. Moonngam, P. Tunjina, D. Deesom, C. Banjongprasert,