Measurements of suspended sediment transport and turbulent coherent structures induced by breaking waves using two-phase volumetric three-component velocimetry

Sediment suspension and transport under plunging regular waves was investigated in a laboratory surf zone using the volumetric three-component velocimetry technique. The two-phase flow measurements captured the motions of sediment particles simultaneously with the three-component, three-dimensional velocity fields of turbulent coherent structures (large eddies) induced by plunging breakers. Sediment particles were separated from fluid tracers based on a combination of particle spot size and brightness in the two-phase flow images. The interactions between the large eddies and bottom sediment were investigated in the outer surf zone. The measured data showed that breaker vortices impinging on the bottom was the primary mechanism that lifted sediment particles into suspension. High suspended sediment concentrations were found in the wall-jet region where the impinging flow was deflected outward and upward. Sediment particles were also trapped by counter-rotating vortices behind the down flow. Suspended sediment concentrations were significantly lower in the impingement zone where the fluid velocities were downward, even though the turbulent kinetic energy in the down flow was very high. Suspended sediment concentration was well correlated with vertical velocity and apparent shear stresses in the deflected flow, and with vorticity magnitude in the counter-rotating vortices. A linear relationship was found between net sediment flux and net turbulent kinetic energy flux over one wave cycle. It was found that a strong deflected flow in front of the impingement zone enhanced onshore sediment transport compared to a more symmetrical flow pattern, while counter-rotating vortices kept sediment particles in suspension for transport offshore after flow reversal. Onshore sediment transport was observed in less than 20% of the breaking waves. In most wave cycles, net sediment flux was directed offshore due to advection by predominantly offshore flow velocities.