کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5476182 1521431 2017 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Gas-particle flows and erosion characteristic of large capacity dry top gas pressure recovery turbine
ترجمه فارسی عنوان
جریان ذرات گاز و فرسایش ویژگی از ظرفیت بزرگ توربین خروجی فشار گاز بالا
کلمات کلیدی
توربین بازیابی فشار گاز بالا. جریان گاز ذرات، شبیه سازی عددی، ورقه ورودی بهینه سازی پروفایل تیغه،
ترجمه چکیده
بر اساس مدل نرخ فرسایش و مدل بازتاب ذرات مواد تیغه ای که از طریق تست فرسایش شتابنده تحت دمای بالا حاصل می شود، شبیه سازی های عددی سیستماتیک از جریان گاز پیچیده گاز در ولتاژ ورودی و آبشار یک توربین بازیابی فشار گاز با ظرفیت بزرگ در این مرحله انجام می شود. کاغذ. تاثیر ساختار ولتاژ ورودی و ساختار کانال آبشار بر عملکرد آیرودینامیک و ویژگی های فرسایش توربین در ابتدا مورد بررسی قرار گرفته است. نتایج نشان می دهد که اگر چه جریان مخلوط و جریان های گرداب در ولتاژ ورودی توربین شکل می گیرند، به علت سرعت گاز کم، کل فشار ولتاژ کمتر از 7/0 درصد می باشد. خسارت فرسایش بر روی لبه انتهایی نازل و پره های چرخشی عمدتا ناشی از رفتار برشی با سرعت بالا ذرات خاکستر است. ساختار معمولی ورودی موجب فرسایش ناگهانی نازلهای مرحله اول در امتداد جهت گردشی می شود. نازل هایی که در زیر تقسیم افقی واقع شده اند، عمدتا در قسمت ریشه تیغه فرسایش می یابند، در حالی که توزیع فرسایش نازل هایی که در بالای تقسیم افقی قرار دارند نامنظم است و بدتر از سطح فرسایش دایره نیمه پایین است. خصوصیات شتاب جریان و ساختار محدب آبشار باید جامع در نظر گرفته شود تا به طور همزمان عملکرد آیرودینامیکی و ضد فرسایش توربین را بهبود بخشد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی (عمومی)
چکیده انگلیسی
Based on the erosion rate model and the particle rebound model of blade material obtained through accelerated erosion test under high temperature, systematic numerical simulations of the complex gas-particle flows in inlet volute and cascade of a large capacity gas pressure recovery turbine are performed in this paper. The influence of inlet volute structure and cascade channel structure on the aerodynamic performance and erosion characteristics of turbine is first investigated. Results show that although mixing flows and vortex flows are formed in turbine intake volute, total pressure loss of volute is less than 0.7% because of low gas velocity. Erosion damage on the trailing edge of nozzles and rotating blades is mainly caused by high-speed cutting behavior of ash particles. The typical inlet volute structure results in an uneven erosion of first stage nozzles along circumferential direction. Nozzles located below the horizontal split are mainly eroded in blade root area, while erosion distribution of nozzles located above the horizontal split is irregular, and worse than the erosion degree of the lower half circle. Flow acceleration characteristics and cascade circumferential structure must be comprehensively considered so as to simultaneously improve the aerodynamic and anti-erosion performance of turbine.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy - Volume 120, 1 February 2017, Pages 498-506
نویسندگان
, , , , , ,