Syringe test screening of microbial gas production activity: Cases denitrification and biogas formation

- Cheap plastic syringes served well as batch reactors in mass screening tests.
- Gas producing cultures were monitored by simply recording volume expansion.
- Inocula could be standardized by using moving bed biofilm carriers or granules.
- Denitrification was screened successfully comparing substrates as well as inocula.
- Biogas formation was screened successfully, up to a month by removing excess gas.

Mass produced plastic syringes may be applied as vessels for cheap, simple and large scale batch culture testing. As illustrated for the cases of denitrification and of biogas formation, metabolic activity was monitored by direct reading of the piston movement due to the gas volume formed. Pressure buildup due to friction was shown to be moderate. A piston pull and slide back routine can be applied before recording gas volume to minimize experimental errors due to friction. Inoculum handling and activity may be conveniently standardized as illustrated by applying biofilm carriers. A robust set of positive as well as negative controls (“blanks”) should be included to ensure quality of the actual testing.The denitrification test showed saturation response at increasing amounts of inoculum in the form of adapted moving bed biofilm reactor (MBBR) carriers, with well correlated nitrate consumption vs. gas volume formed. As shown, the denitrification test efficiently screened different inocula at standardized substrates. Also, different substrates were successfully screened and compared at standardized inocula.The biogas potential test showed efficient screening of different substrates with effects of relative amounts of carbohydrate, protein, fat. A second case with CO2 capture reclaimer waste as substrate demonstrated successful use of co-feeding to support waste treatment and how temperature effects on kinetics and stoichiometry can be observed.In total, syringe test screening of microbial gas production seems highly efficient at a low cost when properly applied.

47