Constrained optimization of structures with displacement constraints under various loading conditions

Optimization problems often involve constraints and restrictions which must be considered in order to obtain an optimum result and the resultant solution should not deviate from any of the imposed constraints. These constraints and restrictions are imposed either on the design variables or on the algebraic relations between them. Constraints of allowable stress, minimum size and buckling of members in the absence of allowable displacement constraint are the most important factors in optimization of the cross-sectional area of structural elements. When the allowable displacement constraint is included in the problem as a determinant parameter, since the specifications of most of elements affect the displacement rate, the way of imposing and considering this constraint requires special care. In this research the way of simultaneous imposition of multi displacement constraints for optimum design of truss structures in several load cases is described. In this method various constraints for different load cases are divided into active and passive constraints. The mathematical formulation is based on the classical method of Lagrange Multipliers. Overall, this simple method can be employed along with other constraints such as buckling, allowable stress and minimum size of members for imposing the displacement constraint in various load cases.