کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5787145 | 1641111 | 2017 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Characterization of rock weathering using elastic waves: A Laboratory-scale experimental study
ترجمه فارسی عنوان
تشخیص هوای سنگ با استفاده از امواج الاستیک: یک مطالعه تجربی در مقیاس آزمایشگاهی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سرعت موج فشاری، قطر بینی، سرعت موج برشی، شاخص دوام گریل، آب و هوا،
ترجمه چکیده
هوای سنگ از طریق مکانیزم های مختلف می تواند با تکنیک های مختلف مشخص شود. به عنوان مثال، سرعت موج فشرده سازی عمدتا با استفاده از یک روش غیر مخرب مورد استفاده قرار می گیرد. با این وجود، استفاده از سرعت موج برشی که برای نشان دادن خصوصیات سنگ شناسی محیط مناسب است، به ندرت برای ارزیابی زوال سنگ مورد استفاده قرار می گیرد. هدف از این مطالعه، اعمال امواج الاستیک، از جمله امواج فشاری و برش، برای تشخیص سنگ های هوادهی است. علاوه بر این، روش تغییر وزن برای برآورد هوای سنگ بر اساس تخلخل تصویب می شود. آب شور بسیار متمرکز برای به دست آوردن آب و هوای شیمیایی با شبیه سازی آب دریا استفاده می شود. علاوه بر این، آزمون دوام کاهشی برای شبیه سازی هوای مکانیکی انجام می شود. امواج فشاری، امواج برشی و وزن در هر مرحله از هوشیاری اندازه گیری می شوند. میانگین تغییرات در سرعت موج فشاری، سرعت موج برشی و تخلخل پس از 3 مرحله شیمیایی و 9 مرحله مکانیکی هوا، به ترتیب 47.4٪، 55.5٪ و 78.2٪ است. شاخص دوام کاهشی با افزایش میزان هوای مکانیکی به تدریج کاهش می یابد. علاوه بر این، تجزیه و تحلیل آماری و رگرسیون خطی چندگانه برای همبستگی شاخص دوام شل با سرعت موج فشاری، سرعت موج برشی و تخلخل انجام شد. این آزمایش ها نشان می دهد که سرعت موج برش با شاخص دوام کاهشی بسیار زیاد است. این مطالعه نشان می دهد که سرعت موج کششی را می توان به طور موثر برای توصیف هوای سنگی مورد استفاده قرار داد.
موضوعات مرتبط
مهندسی و علوم پایه
علوم زمین و سیارات
فیزیک زمین (ژئو فیزیک)
چکیده انگلیسی
The weathering of rock through various mechanisms can be characterized by multiple techniques. For example, the compressional wave velocity has been mainly used with the advantage of being a non-destructive method. However, the application of shear wave velocity, which is suitable for representing the lithological characteristics of the medium, has rarely been applied to assess the deterioration of rock. The objective of this study is to apply the elastic waves, including both compressional and shear waves, to characterize weathered rock. Furthermore, the technique of weight change is adopted to estimate the weathering of rock based on porosity. Highly concentrated salty water is used to achieve chemical weathering by simulating sea water. In addition, the slake durability test is performed to simulate the mechanical weathering. Compressional waves, shear waves and weight are measured at each weathering step. The average variation in compressional wave velocity, shear wave velocity and porosity after 3 chemical and 9 mechanical weathering steps is approximately 47.4%, 55.5% and 78.2%, respectively. The slake durability index gradually decreases with increasing amounts of mechanical weathering. Furthermore, the statistical and the multiple linear regression analyses were carried out to correlate the slake durability index with the compressional wave velocity, shear wave velocity, and porosity. These tests indicate that the shear wave velocity is highly correlated with the slake durability index. This study demonstrates that the elastic wave velocities can be effectively used to characterize rock weathering.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Applied Geophysics - Volume 140, May 2017, Pages 24-33
Journal: Journal of Applied Geophysics - Volume 140, May 2017, Pages 24-33
نویسندگان
Jong-Sub Lee, Hyung-Koo Yoon,