Sol–gel network silica/modified montmorillonite clay hybrid nanocomposites for hydrophobic surface coatings

Sol–gel silica/nanoclay composites were prepared through sol–gel polymerization technique using tetraethylorthosilicate precursor and montmorillonite (MMT) clay in aqueous media. In this study, both montmorillonite-K+ and organically modified MMT (OMMT) clays were used. The prepared composites were coated on glass substrate by making 1 wt% solution in ethyltrichlorosilane. The incorporation of nanoclay does not alter the intensity of characteristic Si–O–Si peak of silica network. Thermogravimetric studies show that increasing clay content increased the degradation temperature of the composites. Differential scanning calorimetry (DSC) results of organically modified MMT nanoclay incorporated composite show a shift in the melting behavior up to 38 °C. From DSC thermograms, we observed that the ΔH value decreased with increasing clay loading. X-ray diffraction patterns prove the presence of nanoclay in the composite and increase in the concentration of organically modified nanoclay from 3 to 5 wt% increases the intensity of the peak at 2θ = 8° corresponds to OMMT. Morphology of the control silica gel composite was greatly influenced by the incorporation of OMMT. The presence of nanoclay changed the surface of control silica gel composite into cleaved surface with brittle in nature. Contact angle measurements were done for the coatings to study their surface behavior. These hybrid coatings on glass substrate may have applications for hydrophobic coatings on leather substrate.

Figure optionsDownload as PowerPoint slideHighlights
► Silica/nanoclay composites were prepared using TEOS and Montmorillonite.
► Composites were coated on glass substrate in 1 wt% ethyltrichlorosilane solution.
► Sol-gel silica/nanoclay hybrids show more hydrophobicity to the films.
► Clay load imparts anti-wetting property to the resultant hybrid films.
► These hybrid coatings on glass substrate have applications on leather substrate.