کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
614700 | 1454825 | 2014 | 29 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Nanoscratch and indentation fracture toughness in superconductor Ba-Fe-As single crystals with lamellar structure
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Tribological aspects of Ba(Fe0.974Mn0.026)2As2 single crystals were analyzed through nanoscratch tests and correlated with fracture toughness data. The ~100 µm thick samples present ab-planes stacked by following the c-axis (lamellar structure). Scratch hardness (0.31 GPa for ab-plane and 2.10 GPa for a(b)c-plane) and wear rate are in accordance with previous results for indentation hardness. Microcracking rules the scratching behavior of both planes, the ab-one presenting a marked critical load for cracking that is loading-rate dependent. Fracture toughness, estimated by the minimum load for crack nucleation in indentation tests, was statistically similar, 1.8±0.9 MPa m1/2 for the ab-plane and 1.5±0.5 MPa m1/2 for the a(b)c-plane. Results lead to the conclusion that the lamellar structure determines the material tribo-mechanical behavior.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 79, November 2014, Pages 84-91
Journal: Tribology International - Volume 79, November 2014, Pages 84-91
نویسندگان
Fábio T. Dias, Lincoln B.L.G. Pinheiro, Gelson B. de Souza, Francisco C. Serbena, Simone A. da Silva, Alcione R. Jurelo, Sergey L. Bud'ko, Alex Thaler, Paul C. Canfield,