کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
616335 | 881486 | 2009 | 7 صفحه PDF | دانلود رایگان |
In situ pressure measurements within dimples formed in glass–steel point contacts under various sliding conditions were performed using Raman microspectroscopy. Experiments were conducted using a ball-on-disc type apparatus in which a circular contact is formed between a rotating glass disc and a rotating steel ball. Film thickness distributions were measured by duochromatic optical interferometry. Polyphenyl ether oil (5P4E) which has a high pressure–viscosity coefficient was used to produce a dimple in the contact area. Experimental results show that the pressure increases locally in the dimple zone and the pressure profile changes, accompanying the changes of the dimple location as a function of the slide-to-roll ratio. The maximum pressure is located downstream the maximum height of the dimple. The rheological response of the oil film under dimple occurrence conditions is discussed.
Journal: Tribology International - Volume 42, Issue 5, May 2009, Pages 724–730