کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
620834 | 882516 | 2011 | 6 صفحه PDF | دانلود رایگان |
This study has been made of the leaching process to reduce carbonate content in calcareous phosphate rock using lactic acid. The samples mineralogical constituents were apatite, calcite, quartz and dolomite. In this study, the effect of important variables such as reaction time, acid concentration, liquid/solid ratio, particle size and temperature in laboratory scale was optimized. It was found that the leaching rate of carbonate material increased with increasing the acid concentration, temperature, reaction time and decreasing solid/liquid ratio and particle size. The experimental data were tested through graphic and statistical methods and a shrinking core kinetics model was presented to describe the dissolution and to analyze the data. The activation energy for leaching was found to be 43.58 kJ/mol and, consequently, the rate of the reaction based on a chemical reaction-controlled process could be expressed as 1 − (1 − α)1/3 = 6.05 × 106 e−43.58/RTt.
Research highlights▶ In this study we examine the calcareous phosphate leaching using lactic acid as new reagent. ▶ We studied effects of Acid concentration, reaction time, particle size and liquid to solid ratio on the recovery of phosphate. ▶ Leaching kinetic were of calcareous material was well described by 1 − (1 − α)1/3 = kt and leaching process was controlled by chemical reaction.
Journal: Chemical Engineering Research and Design - Volume 89, Issue 10, October 2011, Pages 2153–2158