کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
633427 | 1456032 | 2014 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Controlled surface morphology of polyamide membranes via the addition of co-solvent for improved permeate flux
ترجمه فارسی عنوان
مورفولوژی سطوح کنترل شده غشاهای پلی آمید از طریق افزودن حلال برای افزایش شار نفوذی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
پلی آمید، هم حلال، پلیمریزاسیون اینترفیس مورفولوژی سطح، چند لایه
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
تصفیه و جداسازی
چکیده انگلیسی
Polyamide membranes with a controlled surface morphology were prepared by the interfacial polymerization of 1,3-phenylenediamine (MPD) with 1,3,5-benzenetricarbonyl trichloride (TMC) on polysulfone ultrafiltration supports. In a novel polymerization method, co-solvents, which included acetone, ethyl acetate, diethyl ether, toluene, isopropyl alcohol (IPA) and N,Nâ²-dimethyl formamide (DMF), were added into the organic phase which made it possible to control the surface morphology and polyamide network structures. As-prepared, the membranes showed multi-layered ridge-and-valley structures, and the types of co-solvent successfully controlled permeate flux and rejection. Polyamide membranes prepared by the addition of 2Â wt% ethyl acetate, showed the best performance with NaCl rejection of 99% and permeate flux of more than 1Â m3/(m2Â d) at 1.5Â MPa, which was about twice that of a membrane prepared without a co-solvent.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Membrane Science - Volume 467, 1 October 2014, Pages 303-312
Journal: Journal of Membrane Science - Volume 467, 1 October 2014, Pages 303-312
نویسندگان
Takashi Kamada, Tomomi Ohara, Takuji Shintani, Toshinori Tsuru,