Membrane characterization by dynamic hysteresis: Measurements, mechanisms, and implications for membrane fouling

The surface characteristics of reverse osmosis membranes and their relation to membrane fouling are systematically investigated by measuring membrane dynamic hysteresis based on the Wilhelmy plate method. Dynamic hysteresis represents the difference between the forces applied to a membrane surface when it is advanced into and withdrawn from a liquid or solution. Our results demonstrate that the chemical surface heterogeneity of various RO membranes could be quantified by measuring their dynamic hysteresis. The chemical heterogeneity was mostly related to the distribution of surface charge rather than average zeta potential. There was a remarkable correlation between the chemical surface heterogeneity and membrane dynamic hysteresis. It was clearly shown that dynamic hysteresis varied substantially with respect to the solution chemistry of test solutions. The dynamic hysteresis of RO membranes measured in the presence of organic foulants was further related to the flux-decline rate determined from bench-scale fouling experiments. It was found that higher flux-decline rate was obtained for RO membranes with larger dynamic hysteresis. Based on the results in this study, it is demonstrated that dynamic hysteresis measurements can be a promising tool for characterizing membrane surfaces as well as assessing membrane fouling.

Research highlights▶ Presenting a novel method for characterizing membrane surface by dynamic hysteresis. ▶ Investigating mechanisms governing and factors affecting dynamic hysteresis. ▶ Featuring the chemical aspects of dynamic hysteresis. ▶ Relating dynamic hysteresis to membrane fouling.