کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
644976 | 1457132 | 2016 | 36 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermal responses of heat pipes with different wick structures under variable centrifugal accelerations
ترجمه فارسی عنوان
پاسخ های حرارتی لوله های حرارتی با سازه های مختلف چوب در زیر شتاب های گریز از مرکز متغیر
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
لوله حرارتی، پاسخ گرمایی، شتاب گریز از مرکز، ساختار ویک
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
The thermal response of heat pipes is commonly investigated under different inclinations in static state by increasing the heat load at the evaporator zone until the pipes dry out. In practical applications, heat pipes are utilized not only in static state but also in dynamic state. In this work, a centrifugal apparatus is developed to serve as experimental equipment, to subject the heat pipe samples to centrifugal accelerations that range from 1âg to 2âg. Heat pipe samples are fabricated with four types of wicks, namely, grooved (G), sintered (S), sintered-grooved composite (SG), and grooved with half sintered length (SGH). Thermal responses of these samples are investigated on the apparatus. Results show that the heat pipes with SG wicks demonstrate the best thermal behavior among the samples but remain noticeably affected by enhanced centrifugal acceleration. By contrast, the G wick heat pipes contribute the least to operation under centrifugal acceleration.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 96, 5 March 2016, Pages 352-363
Journal: Applied Thermal Engineering - Volume 96, 5 March 2016, Pages 352-363
نویسندگان
Yong Li, Zixi Li, Chunyan Chen, Yuying Yan, Zhixin Zeng, Bo Li,