Thermal performance of a Stirling engine powered by a solar simulator

• The performance of a beta type Stirling engine was investigated.
• 400 and 1000 W halogen lamps were used as a solar simulator in the experiments.
• Cavity temperature was measured 623 and 873 K for 400 and 1000 W lamps.
• 1000 W halogen lamp provided better engine performance and thermal efficiency.
• Experimental results of efficiency were compared with nodal analysis results.

In this study, the performance of a beta type Stirling engine which works at relatively lower temperatures was investigated using 400 W and 1000 W halogen lamps as a heat source and helium as the working fluid. The working fluid was charged into the engine block and the pressure of the working fluid was ranged from 1 to 5 bars with 1 bar increments. The halogen lamps were placed into a cavity adjacent to the hot end of the displacer cylinder, which is made of aluminum alloy. In the experiments conducted with 400 W halogen lamp, the temperature of the cavity was 623 ± 10 K. The power, torque and thermal efficiency of the engine were determined to be 37.08 W, 1.68 Nm and 9.27%, at 5 bar charge pressure. For the 1000 W halogen lamp, the temperature of the cavity was determined to be 873 ± 10 K. The power, torque and thermal efficiency of the engine were determined to be 127.17 W, 3.4 Nm and 12.85%, at the same charge pressure. The experimental thermal efficiencies of the engine were also compared with thermodynamic nodal analysis.