کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
645625 | 1457147 | 2015 | 20 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermodynamic analysis of an idealised solar tower thermal power plant
ترجمه فارسی عنوان
تجزیه و تحلیل ترمودینامیکی نیروگاه حرارتی ایده آل خورشیدی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
در سیستم قدرت حرارتی واقعی برج خورشیدی، به طور گسترده ای تأیید شده است که غیر قابل برگشت بودن ترمودینامیکی، مانند از دست دادن کانکتور و شعاعی در گیرنده برج و مقاومت حرارتی مبدل های حرارتی، اجتناب ناپذیر است. با توجه به عوامل فوق ذکر این مقاله، یک مدل ایده آل از سیستم قدرت حرارتی برج خورشیدی برای تحلیل اثر پارامترهای مختلف بر راندمان تبدیل حرارتی و اکسرژی، از جمله دمای کارگر گیرنده، نسبت غلظت، کارایی موتور حرارتی غیرقابل برگشت، و غیره ارائه می دهد. بنابراین، تغییرات حداکثر بازدهی تبدیل حرارتی از نظر نسبت غلظت و بهره وری موتور حرارتی غیرقابل برگشت، می تواند به لحاظ نظری حاصل شود. نتایج نشان می دهد که بالا بردن دمای کار گیرنده می تواند در ابتدا کارایی ترانس تبدیل حرارتی و اگزرژی را افزایش دهد تا دمای مطلوب به دست آید. دمای مطلوب نیز با نسبت غلظت افزایش می یابد. علاوه بر این، نسبت غلظت اثر مثبت بر راندمان تبدیل حرارتی: افزایش نسبت غلظت می تواند بهره وری تبدیل تا زمانی که نسبت غلظت بسیار بالا است، پس از آن یک افت آهسته وجود دارد. در نهایت، بهره وری موتور غیرقابل برگشت نیز تاثیر قابل توجهی در بازدهی تبدیل حرارتی دارد، این کارآیی تبدیل حرارتی را تا زمانی که به حداکثر و مطلوب برسد، افزایش می دهد و پس از آن بازده تبدیل به شدت کاهش خواهد یافت.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
In the real solar tower thermal power system, it is widely acknowledged that the thermodynamic irreversibility, such as convective and radiative loss on tower receiver, and thermal resistance in heat exchangers, is unavoidable. With above factors in mind, this paper presents an ideal model of the solar tower thermal power system to analyze the influence of various parameters on thermal and exergy conversion efficiencies, including receiver working temperature, concentration ratio, endoreversible heat engine efficiency and so forth. And therefore the variation of maximum thermal conversion efficiency in terms of concentration ratio and endoreversible heat engine efficiency could be theoretically obtained. The results indicate that raising the receiver working temperature could initially increase both thermal and exergy conversion efficiencies until an optimum temperature is reached. The optimum temperature would also increase with the concentration ratio. Additionally, the concentration ratio has a positive effect on the thermal conversion efficiency: increasing the concentration ratio could raise the conversion efficiency until the concentration ratio is extremely high, after which there will be a slow drop. Lastly, the endoreversible engine efficiency also has significant influence on the thermal conversion efficiency, it will increase the thermal conversion efficiency until it reaches the maximum and optimum value, and then the conversion efficiency will drop dramatically.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 81, 25 April 2015, Pages 271-278
Journal: Applied Thermal Engineering - Volume 81, 25 April 2015, Pages 271-278
نویسندگان
Hongfei Zheng, Xu Yu, Yuehong Su, Saffa Riffat, Jianyin Xiong,