کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
646504 | 1457158 | 2014 | 6 صفحه PDF | دانلود رایگان |
• 23.6% energy consumption reduction of refrigerator by hot-wall condenser removal.
• 19.3% R134a refrigerant charge amount reduction of refrigerator cycle.
• Reduction of the production cost by eliminating of nearly 10 m of pipe.
This paper presents experimental results of hot-wall condenser removal, condenser air cooling increment, capillary tube diameter effect, compressor cooling capacity effect, changes of R134a charge amount and ambient temperature effect on a commercial bottom mounted freezer to decrease energy consumption and production cost. Experiments were carried out on a 418 L dual evaporator domestic bottom mounted freezer using 155 g R134a as the refrigerant. As a result, the improvement of refrigerator energy consumption was studied experimentally. Investigations made under controlled conditions have shown that the more the heat removed from the condenser, the higher the efficiency can be. Data were provided under the standard conditions for evaluating energy consumption and efficiency of refrigerators. Results showed that by hot-wall condenser removal, condenser air cooling increment and decreasing compressor cooling capacity, energy consumption and refrigerant charge amount reduced by 23.6% and 19.3%, respectively.
Journal: Applied Thermal Engineering - Volume 67, Issues 1–2, June 2014, Pages 335–340