Implementation of heat production and storage technology and devices in power systems

Implementation of heat storage devices and technologies at power generation plants is a promising way to provide more efficient use of natural energy resources. Heat storage devices can partly replace conventional heating technologies (such as direct use of fossil fuels) during peak energy demand or in the situations where heat and electricity supply and demand do not coincide and to obtain low cost heat energy which can be further transmitted to industrial, commercial and domestic consumers.This paper presents the innovative Heat Production and Storage Device and its application at conventional, nuclear and renewable power generation plants for optimization and balancing of electricity grids. The Heat Production and Storage Device is a vessel type induction-immersion heat production and storage device which produces pre-heated water under pressure for heat energy conservation. Operation of this device is based on simultaneous and/or sequential action of an inductor and an immersion heater and can be easily connected to the electricity network as a single or a three phase unit. Heat energy accumulated by the Heat Production and Storage Device can be utilized in different industrial technological processes during periods of high energy prices.

► Heat Production and Storage Device for energy conservation within low load hours.
► Simultaneous and/or sequential operation of the inductor and immersion heater.
► Transform the energy of low frequency electrical current (50 Hz) into heat energy.
► Connection to the electricity network either in single or three phase unit.
► Heat Production and Storage Device will enhance the economic value of the system.