Isothermal composite adsorbent. Part I: Thermal characterisation

Adsorption and desorption are respectively exo and endothermic phenomena leading to significant temperature changes in adsorption columns. Enhanced efficiency of a sorption process could be obtained under isothermal conditions, either for gas storage, purification or separation applications. The heat transfer within the adsorbent beds can be managed in situ, using thermal energy storage material: a phase change materials (PCM) for example. The thermal behaviour of a mixture of activated carbon and PCM during CO2 adsorption has been studied. The thermal characteristics of the involved materials have been determined and experiments carried out to highlight the positive effect of the PCM to reduce the CO2 adsorption heat effects on an activated carbon bed. Calorimetry was the technique used for all the thermal characterisations. It appears that the heat effects induced by CO2 adsorption are reduced by the presence of the PCM together with the adsorbent. The endothermic effect of fusion balances the heat effect of adsorption and significantly reduces the temperature changes.