کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
649414 | 1457213 | 2007 | 10 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: An innovative ceramic high temperature plate-fin heat exchanger for EFCC processes An innovative ceramic high temperature plate-fin heat exchanger for EFCC processes](/preview/png/649414.png)
For heat exchanger applications needing extreme operation temperatures such as in the field of power generation or heat recovery a ceramic plate-fin heat exchanger is proposed, based on the “Offset Strip Fin” design. At first the principal selection of the materials and the environmental barrier coating (EBC) needed to protect the substrate from the aggressive flue gases is explained. Then a manufacturing process is described able to incorporate the EBC on all parts having contact to the flue gases. On the basis of a representative biomass fuelled externally fired combined cycle (EFCC) process with an electrical output of 6 MW the thermal design is presented resulting in a counter flow ceramic heat exchanger block of weight 4.0 t and surface area densities of 443 mm2/mm3 on the flue gas side and 286 mm2/mm3 on the pressurized process gas side. To ensure the thermomechanical integrity investigations of both the steady state operation and the case of an emergency stop were investigated by means of finite element method (FEM). In the case of steady state operation a security factor of 8.5 was achieved. This demonstrates that the occurring stresses in both cases are controllable.
Journal: Applied Thermal Engineering - Volume 27, Issues 8–9, June 2007, Pages 1285–1294