کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
651000 | 1457398 | 2016 | 24 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Experimental study of Cu-water nanofluid heat transfer and pressure drop in a horizontal double-tube heat exchanger
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This article reports an experimental study on the performance of horizontal double tube counter-flow heat exchanger. Due to the modicum in the heat transfer surface area, the overall heat transfer coefficient is enhanced. Cu-nanoparticles are added to the cold water in the annulus of the heat exchanger, however, the inner tube that contains the hot water is rotated. The inner tube is made of copper with 25.4Â mm outer diameter with a thickness of 2Â mm, while the outer tube, which is made of transparent Acrylic Plexiglass, has an outer diameter of 76.2Â mm and 5Â mm thickness. Cu-water nanofluid is prepared at volume fractions of 1-3% and the inner tube is rotated with speed from 0 to 500Â rpm. Results demonstrated a remarkable enhancement in the rate of heat transfer due to the nanoparticles addition as well as the inner tube rotation. Consequently, the effectiveness and the transfer number units (NTU) of the heat exchanger are augmented. Optimization between heat transfer augmentation and the pressure drop penalty is carried out. Finally, the use of the nanofluid has a little penalty in pressure drop in compared with the inner tube rotation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Experimental Thermal and Fluid Science - Volume 78, November 2016, Pages 100-111
Journal: Experimental Thermal and Fluid Science - Volume 78, November 2016, Pages 100-111
نویسندگان
Wael M. El-Maghlany, Ahmed A. Hanafy, Amr A. Hassan, Mohamed A. El-Magid,