کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
652361 | 885015 | 2008 | 9 صفحه PDF | دانلود رایگان |
Experiments have been performed to study and obtain the adiabatic wall film cooling effectiveness and the heat transfer over a film-cooled surface that is made inclined at various angles with respect to a highly turbulent flow. The vertical temperature distribution was measured to infer the flow structure and the rate of mixing of film jet with the freestream. The freestream turbulence intensity is controlled to range from 1.0% to 26.4%, the inclination or the divergent angle of the film-cooled surface ranges from 0° to 20°, the blowing parameter from 0.5 to 2.0. It is found that the mixing of the film jet with the freestream is significantly enhanced by both the freestream turbulence intensity and the divergent angle of the film-cooled surface, which leads to the decrease in the film cooling effectiveness and the increase in the heat transfer. However, the inclination angle has more effect on the film cooling performance while the turbulence intensity has more effect on the heat transfer under the film. More detailed discussion is presented. Correlations for both the film cooling effectiveness and the heat transfer under the film-cooled surface have been very successful and are provided.
Journal: Experimental Thermal and Fluid Science - Volume 32, Issue 6, May 2008, Pages 1313–1321