Oxidative degradation of a novel AMP/AEP blend designed for CO2 capture based on partial oxy-combustion technology

The novel solvent POS#1 showed high resistance to degrade and resulted in lower degradation rates than MEA in all the operating conditions evaluated in this work. The maximum degradation of AEP and AMP was 24% and 19%, respectively. MEA degraded almost double under the same conditions. Temperature and O2 concentration enhanced the oxidative degradation of POS #1. However, the use of higher CO2 concentration in the flue gas led to lower degradation rates of AEP and AMP and hence oxidative degradation was partially inhibited under partial oxy-combustion conditions. The presence of higher CO2 content in the flue gas decreased the NH3 production and a 70% reduction of its emissions was achieved as the CO2 concentration shifted from 15%v/v to 60%v/v. Other major degradation compounds such as formate and 2,4-lutidine were also decreased. New degradation products were not identified so that the suggested degradation pathways proposed in the literature were not influenced by the presence of higher CO2 concentrations.