کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
657954 | 1458075 | 2013 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Optimization of the span angle and location of vortex generators in a plate-fin and tube heat exchanger
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A numerical analysis was carried out to study the thermal-hydraulic characteristics of a 3-D laminar in-lined and staggered plate-fin and tube heat exchangers with block type vortex generators (VG) mounted behind the tubes. In this study, the optimization of the VG span angle (θ) and the VG transverse location (Ly) was investigated numerically along with a simplified conjugate-gradient method (SCGM). The area reduction ratio using a vortex generator relative to the plain surface is the objective function to be maximized. A search for the optimum span angle (θ) and transverse location (Ly), ranging from 30° < θ < 60° and 2 mm < Ly < 20 mm, respectively, was performed. The effect of different inlet conditions, (Reynolds number ReDh = 400-1200), was also investigated. The results showed that the maximum area reduction ratios reached 14.9-25.5% combined with the optimal design of (θ, Ly) at ReDh = 400-1200 for the in-lined arrangement, and 7.9-13.6% of the maximum area reduction ratio was achieved for the staggered arrangement.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 67, December 2013, Pages 432-444
Journal: International Journal of Heat and Mass Transfer - Volume 67, December 2013, Pages 432-444
نویسندگان
Jiin-Yuh Jang, Ling-Fang Hsu, Jin-Sheng Leu,