کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
658649 | 1458091 | 2012 | 13 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Computational modeling and design of actively-cooled microvascular materials Computational modeling and design of actively-cooled microvascular materials](/preview/png/658649.png)
The computational modeling and design of an actively-cooled microvascular fin specimen is presented. The design study is based on three objective functions: (i) minimizing the maximum temperature in the thermally loaded fin, (ii) optimizing the flow efficiency of the embedded microchannel, and (iii) minimizing the void volume fraction of the microvascular material. A recently introduced Interface-enriched Generalized Finite Element Method (IGFEM) is employed to evaluate the temperature field in a 2D model of the specimen, allowing for the accurate and efficient capturing of the gradient discontinuity along the fluid/solid interface without the need of meshes that conform to the geometry of the problem. Finding the optimal shape of the embedded microchannel is thus accomplished with a single non-conforming mesh for all configurations. Prior to the optimization study, the IGFEM solver is validated through comparison with infrared measurements of the thermal response of an epoxy fin with a sinusoidal microchannel.
Journal: International Journal of Heat and Mass Transfer - Volume 55, Issues 19–20, September 2012, Pages 5309–5321