کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6593838 1423547 2018 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Scaling of the detonation product state with reactant kinetic energy
ترجمه فارسی عنوان
مقیاس حالت محصول منفجره با انرژی جنبشی واکنش دهنده
کلمات کلیدی
انفجار، معادله محصول دولت، گرما از انفجار، سرعت انفجار، انفجار بالا،
ترجمه چکیده
مواد شیمیایی مواد منفجره یکی از مواد ذخیره سازی با قدرت بالا و انرژی بالا را در اختیار شما قرار می دهد. در طی انفجار، انتقال این انرژی به مواد مجاور، توسط معادله محصول انفجار دولت تنظیم می شود. هیچ روش دقیقی برای پیش بینی این رابطه ترمودینامیکی وجود ندارد و داده های معادله حالت هنوز به صورت آزمایشی برای هر شکل جدید یا تراکم شارژ مشخص می شود. در اینجا ما یک معادله ی محصول انفجاری جهانی را به دست می آوریم که از چندین همبستگی تجربی اختراع شده در اندازه گیری های محصول انفجاری فاز متناوب پیشین حاصل شده است. این مدل فقط به چگالی شار اولیه و سرعت انفجار به عنوان ورودی بستگی دارد، به طوری که به طور قابل توجهی سادهتر از فرآیند کالیبراسیون نسبت به مدلهای موجود، که نیاز به اندازه گیری تا هفت پارامتر خاص را دارد. این نتیجه جدید نشان می دهد مقیاس تراکم انرژی محصول با تراکم انرژی جنبشی واکنش دهنده، که محصول تراکم اولیه انفجاری و سرعت انفجار مربع برای همه مواد پر انرژی فشرده است و جزئیات دقیق ریز ساختار یا مواد شیمیایی تنها بر تراکم انرژی محصول تأثیر می گذارد این دو پارامتر
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی
Chemical explosives provide one of the most high-power and energy-dense storage materials available. During detonation, transfer of this energy to adjacent materials is governed by the detonation product equation of state. No accurate methodology exists for prediction of this thermodynamic relationship and equation-of-state data continues to be experimentally characterized for each new formulation or charge density. Here we present a universal detonation product equation of state derived from several newly discovered empirical correlations in prior condensed-phase detonation product measurements. This model depends only on initial charge density and detonation velocity as inputs, dramatically simplifying the calibration process relative to existing models, which require measurement of up to seven formulation-specific parameters. This new result implies the product energy density scales with reactant kinetic energy density, which is the product of the explosive initial density and detonation velocity squared, for all condensed-phase energetic materials and that explosive microstructural or chemical details only influence the product energy density though these two parameters.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Combustion and Flame - Volume 190, April 2018, Pages 240-251
نویسندگان
,