کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
660970 | 1458145 | 2008 | 9 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Effect of corrugated plates in an in-phase arrangement on the heat transfer and flow developments Effect of corrugated plates in an in-phase arrangement on the heat transfer and flow developments](/preview/png/660970.png)
In the present study, the numerical results of the heat transfer and flow developments in the corrugated channel under constant heat flux conditions are presented. The test section is the channel with two opposite corrugated plates which all configuration peaks lie in an in-phase arrangement. The corrugated plates with three different corrugated tile angles of 20°, 40°, and 60° are tested with the height of the channel of 12.5 mm. The model was simulated for the Reynolds number and heat flux in the ranges of 400–1600 and 0.5–1.2 kW/m2, respectively. The flow and heat transfer developments are simulated by using the k-ε standard turbulent model. A finite volume method with the structured uniform grid system is employed for solving the model. The predicted results are validated by comparing with the measured data. There is reasonable agreement from the comparison between the numerical data and experimental data. Effects of relevant parameters on the heat transfer and flow developments are discussed. Due to the breaking and destabilizing in the thermal boundary zone, the corrugated surface has significant effect on the enhancement of heat transfer and pressure drop.
Journal: International Journal of Heat and Mass Transfer - Volume 51, Issues 15–16, 15 July 2008, Pages 3963–3971