کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
662473 | 1458143 | 2008 | 13 صفحه PDF | دانلود رایگان |
The purpose of the present study was to develop a model to describe the heat and mass transfer during the drying of carrot cubes in a spout-fluidized-bed drier. The model took into account the non-homogeneous shrinkage of the material. The Arbitrary Lagrange–Eulerian (ALE) formulation was applied to enter the problem with moving boundaries. Three phases of drying were distinguished according to the behavior of changes in percent local error of estimation: an initial phase of warming up the material – characterized by a low level of error of moisture content prediction, a second phase – characterized by an increase in the error of moisture content prediction and a phase of decreasing error. A simple test of the sensitivity of the model to the changes in heat transfer coefficient was performed in order to improve the ability of the model to predict the changes in moisture content and temperature of dried carrots. The predicted changes in both the moisture content and the temperature of carrot cubes during drying in a spout-fluidized-bed drier indicate that the model can be successfully applied to describe moisture content, temperature and deformation of dried particles in cases when the very high accuracy of moisture content and temperature prediction is not a crucial element of investigation of the drying process.
Journal: International Journal of Heat and Mass Transfer - Volume 51, Issues 19–20, September 2008, Pages 4704–4716