کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6632208 1424948 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Simulating natural hydrate formation and accumulation in sediments from dissolved methane using a large three-dimensional simulator
ترجمه فارسی عنوان
شبیه سازی تشکیل و انباشت هیدراتهای طبیعی در رسوبات از متان حل شده با استفاده از شبیه ساز سه بعدی بزرگ
ترجمه چکیده
روند تشکیل و هیدراته آهسته از گاز محلول در طبیعت در مقیاس بزرگ در رسوبات شنی با استفاده از یک شبیه ساز هیدرات سه بعدی شبیه سازی شد. با افزایش میزان بیش از حد متان محلول و سرعت مهاجرت مایع منی در سطوح بسیار پایین، میزان تشکیل هیدرات پایین (0.37 درصد حجم منافذ در روز) حاصل شد. اندازه گیری های الکتریکی و صوتی برای ردیابی تشکیل هیدرات در رسوبات انجام شد. یک روند تکاملی هیدرات پویا مشاهده شد: کریستالیزاسیون - مهاجرت - تجمع - کریستالیزاسیون. این فرآیند تکامل، تأثیر مهمی بر اتصال منافذ و قدرت قاب رسوب دارد. پس از فرایند تکاملی پویا، هیدرات ها و هیدرات های پراکنده، قاب های تقویتی سخت را به عنوان مورفولوژی های نهایی در منافات مشاهده می کردند، هرچند تغییرات در سرعت صوتی نشان داد که حمایت فریم، مورفولوژی غالب در منافذ بود. بر اساس این، مقادیر اشباع هیدرات، از مقاومت و مدل های سرعت آکوستیک برای هیدراتهای حاوی قاب پشتیبانی می شود. نتایج محاسبه نشان داد که میزان جذب هیدرات در مکان های مختلف از مدل مقاومت، با استفاده از مدل سرعت آکوستیک با برآورد میزان اشباع هیدرات به دست آمده از معکوس مقاومت، سازگار است. تجزیه و تحلیل توزیع هیدرات فضایی نشان داد که توزیع هیدرات در رسوبات منسوخ شده است. پروفیل های غلظت، دما و سرعت مایع نقش مهمی در این قطع شدن دارند، که ما پیشنهاد می کنیم باید در مطالعات آزمایشی و عددی آینده بررسی شود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی
The slow hydrate formation and accumulation process from dissolved gas in nature was simulated at large-scale in sandy sediments using a three-dimensional hydrate simulator. A low hydrate formation rate (0.37% pore volume per day) was achieved by maintaining the supersaturation of dissolved methane and migration velocity of the pore fluid at very low levels. Electrical and acoustic measurements were performed to track the hydrate formation in the sediments. A dynamic hydrate evolution process was observed: Crystallization - migration - accumulation - recrystallization. This evolution process has a critical effect on the connectivity of the pores and the strength of the sediment frame. After the dynamic evolution process, stiff frame-supporting hydrates and patchy hydrates were observed as the final morphologies in the pores, although the variation in the acoustic velocity indicated that frame supporting was the dominating morphology in the pores. Based on this, hydrate saturation values were inversed from resistivity and acoustic velocity models for frame-supporting hydrates. The calculated results showed that the order of hydrate saturation at different sites from the resistivity model was consistent with that from the acoustic velocity model by overestimating the hydrate saturation obtained from the resistivity inversion. Analysis of the spatial hydrate distribution showed that hydrate distribution in the sediments was discontinuous. The concentration, temperature, and fluid velocity profiles play a key role on this discontinuity, which we propose should be considered in detail in future experimental and numerical studies.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel - Volume 216, 15 March 2018, Pages 612-620
نویسندگان
, , , , , , ,